show sctp connections

This command displays SCTP socket associations status.

Syntax

show sctp connections

Command Mode

Basic and Privileged User

Note

SCTP is applicable only to Mediant 90xx and Mediant Software.

Related Commands

(config-network)# sctp

Example

The example below displays the local SCTP endpoint (i.e., device) titled "Association #1", and the SCTP association status with the remote SCTP endpoint (proxy) titled "Association #2).

show sctp connections
---------------------------------------------------------------------
Association #1
Type:                   SERVER
State:                  LISTEN
Local Addresses:        10.55.3.80, 10.55.2.80
Local Port:             5060
---------------------------------------------------------------------

Association #2
Type:                   CLIENT
State:                  ESTABLISHED
Local Addresses:        10.55.3.80, 10.55.2.80
Local Port:             50226
Remote Addresses        Configured      State
10.55.1.100:5060        Yes             INACTIVE - Primary
10.55.0.100:5060        Yes             ACTIVE – Secondary