snmp settings
This command configures various SNMP settings.
Syntax
(config-system)# snmp settings (snmp)#
|
Command |
Description |
|---|---|
|
activate-keep-alive-trap [interval] |
Enables a keep-alive trap for the agent behind NAT. |
|
community-strings |
Defines SNMP Community Strings (see community-strings). |
|
access-groups |
Defines SNMP Access Groups (see access-groups). |
|
disable {no|yes} |
Enables SNMP. |
|
enable-authentication-trap {off|on} |
Disables the sending of the Authentication Failure SNMP trap (authenticationFailure, OID 1.3.6.1.6.3.1.1.5.5). |
|
enable-advanced-mode {off|on} |
Enables the SNMP advanced mode. |
|
engine-id |
Defines the SNMP Engine ID. 12 HEX Octets in the format: xx:xx:...:xx |
|
snmp-server-interface > ipv4-snmp-network-source |
Defines the alias name that represents the VRF table or IP address of the IPv4 network interface that is used to bind to the SNMP application. |
|
snmp-server-interface-ipv6 > ipv6-snmp-network-source |
Defines the alias name that represents the VRF table or IP address of the IPv6 network interface that is used to bind to the SNMP application. |
|
port |
Defines the port number for SNMP requests and responses. |
|
snmp-acl {community string} |
Sets the configuration. |
|
snmp-transport-type {IPv4|IPv6} |
Defines the IP address version of the SNMP trap destinations. |
|
sys-contact |
Defines the contact person for this managed node (string) . |
|
sys-location |
Defines the physical location of the node (string). |
|
sys-name |
Defines the sysName as descibed in MIB-2 (string). |
|
sys-oid |
Defines the base product system OID - SNMP SysOid (string). |
|
trap-destinations |
Defines SNMP Trap Destinations (see trap-destinations). |
|
trusted-manager |
Defines SNMP Trusted Managers (see trusted-manager). |
|
view-tree-family |
Defines the SNMP View Tree Family (see view-tree-family). |
Command Mode
Privileged User
Example
This example configures the SysOID:
(config-system)# snmp settings (snmp)# sys-oid 1.3.6.1.4.1.5003.10.10.2.21.1.3