voice
This command configures various voice settings.
Syntax
(config-voip)# media voice (media-voice)#
|
Command |
Description |
|---|---|
|
acoustic-echo-suppressor-attenuation-intensity |
Defines acoustic echo suppressor signals identified as echo attenuation intensity. |
|
acoustic-echo-suppressor-enable {off| on} |
Enables network acoustic echo suppressor. |
|
acoustic-echo-suppressor-max-erl |
Defines acoustic echo suppressor max ratio between signal level and returned echo from phone [dB]. |
|
acoustic-echo-suppressor-max-reference-delay |
Defines acoustic echo suppressor max reference delay [10 ms]. |
|
acoustic-echo-suppressor-min-reference-delay |
Defines acoustic echo suppressor min reference delay [10 ms]. |
|
caller-id-transport-type |
Defines the Caller ID Transport type. |
|
default-dtmf-signal-duration |
Defines the time to play DTMF (in msec). |
|
dtmf-detector-enable |
Enables the detection of DTMF signaling. |
|
dtmf-generation-twist |
Defines a delta between the high and low frequency components in the DTMF signal [db]. |
|
dtmf-transport-type |
Defines the transport method of DTMFs over the network. |
|
dtmf-volume |
Defines the DTMF generation volume [-dbm]. |
|
echo-canceller-enable |
Enables the Echo Canceller. |
|
echo-canceller-type |
Defines the Echo Canceller type. |
|
input-gain |
Defines the TDM input gain [dB]. |
|
inter-digit-interval |
Defines the time between DTMFs played (in msec). |
|
mf-transport-type |
Defines the method for transport MFs over the network. |
|
mfr1-detector-enable |
Enables the detection of MF-R1 signaling. |
|
voice-volume |
Defines the voice TDM output gain [dB] |
Command Mode
Privileged User
Example
This example enables the Acoustic Echo Suppressor:
(config-voip)# media voice (media-voice)# acoustic-echo-suppressor-enable on (media-voice)# activate