aggregate-address
This command specifies an aggregate address for both IPv4 and IPV6.
Syntax
aggregate-address a.b.c.d/M aggregate-address a.b.c.d/m summary-only aggregate-address a.b.c.d/m summary-only as-set aggregate-address a.b.c.d/m as-set aggregate-address a.b.c.d/m as-set summary-only aggregate-address a.b.c.d a.b.c.d aggregate-address a.b.c.d a.b.c.d summary-only aggregate-address a.b.c.d a.b.c.d summary-only as-set aggregate-address a.b.c.d a.b.c.d as-set aggregate-address a.b.c.d a.b.c.d as-set summary-only aggregate-address x:x::x:x/m
|
Command |
Description |
|---|---|
|
a.b.c.d |
Defines an IPv4 IP address or subnet mask. |
|
a.b.c.d/m |
Defines an IPv4 IP address/network prefix. |
|
x:x::x:x/m |
Defines an IPv6 aggregate address. |
|
as-set |
Resulting routes include As Set. |
|
summary-only |
Defines aggregated routes are not announced. |
Default
NA
Command Mode
Privileged User
Example
This example specifies an aggregate address.
# configure data (config-data)# router bgp 1 (conf-router)# aggregate-address 10.21.3.150 255.255.0.0