ip name-server
This command defines the DNS relay server’s address on all Layer 3 interfaces. Use the no form of this command to the undefined DNS relay server’s address on all Layer 3 interfaces.
Syntax
ip name-server <first ip address> all ip name-server <first ip address> [<second ip address>|all]
|
Command |
Description |
|---|---|
|
first ip address |
Specifies the primary DNS server address. Specifies a valid IPv4 (dotted-decimal notation) or IPv6 address. |
|
second ip address |
Specifies the secondary DNS server address. This field is not required when specifying a single IP address. It specifies a valid IPv4 (dotted-decimal notation) or IPv6 address. |
|
all |
Apply to all interfaces. |
Default
NA
Related Commands
This command is also available from the interface configuration sub-directory.
Command Mode
Privileged User
Example
This example defines DNS relay servers 10.4.1.1 and 10.4.1.2 for all Layer 3 interfaces:
(config data)# ip name-server 10.4.1.1 10.4.1.2