ip port-map

This command enables Application-Level Gateway (ALG) configuration commands.

Syntax

ip port-map sip disable
ip port-map sip <start_dest_port> [end_dest_port] 
ip port-map rtsp disable
ip port-map rtsp <start_dest_port> [end_dest_port] 
ip port-map pptp disable
ip port-map pptp <start_dest_port> [end_dest_port] 
ip port-map msn disable
ip port-map msn <start_dest_port> [end_dest_port] 
ip port-map mgcp disable
ip port-map mgcp <start_dest_port> [end_dest_port] 
ip port-map l2tp disable
ip port-map l2tp <start_dest_port> [end_dest_port] 
ip port-map ike disable
ip port-map ike <start_dest_port> [end_dest_port] 
ip port-map h323_ras disable
ip port-map h323_ras <start_dest_port> [end_dest_port] 
ip port-map h323_cs disable
ip port-map h323_cs <start_dest_port> [end_dest_port] 
ip port-map ftp disable
ip port-map ftp <start_dest_port> [end_dest_port]
ip port-map dns disable
ip port-map dns <start_dest_port> [end_dest_port]
ip port-map dhcpv6 disable
ip port-map dhcp disable
ip port-map aim disable
ip port-map aim <start_dest_port> [end_dest_port]

Command	Description
start_dest_port	Defines the Destination Port (1-65535).
end_dest_port	Defines the End Destination Port (1-65535).

Default

NA

Command Mode

Privileged User

Example

The following is an example of how this command is used:

(config-data)# ip port-map sip 1000 1200