ipv6 dhcp-client opt-17-sub-1 enterprise

This command configures the device as a DHCPv6 client and configures the Enterprise number for sub-options 1 and 4-10 in DHCPv6 requests (Option 17). If not set, they are not sent. If set, they are sent under the enterprise set.

The sub-options provided the following information:

■

Sub-option code 4: Device serial number

■

Sub-option code 5: Hardware version

■

Sub-option code 6: Software version

■

Sub-option code 7: Boot ROM version

■

Sub-option code 8: Vendor OUI

■

Sub-option code 9: Device model number

■

Sub-option code 10: Vendor identifier

Syntax

ipv6 dhcp-client opt-17-sub-1 enterprise

Command Mode

Privileged User

Related Commands

ipv6 dhcp-client cable-labs-opt-17

Notes

If the command ipv6 dhcp-client cable-labs-opt-17 is set to no, sub-options 4-10 are not sent, even if the command ipv6 dhcp-client opt-17-sub-1 enterprise is set.

Example

This example configures the DHCPv6 client to send sub-options 1 and 4-10 in Option 17.

(config-data)# interface vlan 3
(conf-if-VLAN 3)#  ipv6 dhcp-client opt-17-sub-1 enterprise
(conf-if-VLAN 3)# no shutdown
(conf-if-VLAN 3)# exit