ipv6 prefix-list
This command configures the IPv6 prefix-based filtering mechanism.
Syntax
ipv6 prefix-list <prefix list name> {deny|permit} [X:X::X:X/M] [le <maximum prefix length> ] [ge <minimum prefix length>]
ipv6 prefix-list <prefix list name> {deny|permit} any
ipv6 prefix-list <prefix list name> description <description field>
ipv6 prefix-list <prefix list name> seq <seqnumber> {deny|permit} [X:X::X:X/M] [le <maximum prefix length> ] [ge <minimum prefix length>]
ipv6 prefix-list <prefix list name> seq <seqnumber> {deny|permit}any
ipv6 prefix-list <prefix list name> vrf <VRF table name> {deny|permit} [X:X::X:X/M] [le <maximum prefix length> ] [ge <minimum prefix length>]
ipv6 prefix-list <prefix list name> vrf <VRF table name> {deny|permit} any
ipv6 prefix-list <prefix list name> vrf <VRF table name> description <description field>
ipv6 prefix-list <prefix list name> vrf <VRF table name> [seq <prefix-list seq number>] {deny|permit} [X:X::X:X/M] [le <maximum prefix length>] [ge <minimum prefix length>]
ipv6 prefix-list <prefix list name> vrf <VRF table name> [seq <prefix-list seq number>] {deny|permit} any
ipv6 prefix-list sequence-number [vrf <VRF table name>]
|
Command |
Description |
|---|---|
|
a.b.c.d/m |
Defines the IP prefix network/length. |
|
any |
Defines any prefix match. |
|
description |
Defines up to 80 characters describing this prefix-list. |
|
VRF name |
Defines the vrf name. |
|
prefix list name |
Defines the name of a prefix list. |
|
seqnumber |
Defines the sequence number. Range is [1-4294967295]. |
|
deny |
Specifies the packets to reject. |
|
permit |
Specifies the packets to accept. |
|
le <len> |
The prefix list is applied if the prefix length is less than or equal to the le prefix length. Not used if "prefix to filter" is set to "any". |
|
ge <len> |
The prefix list is applied if the prefix length is greater than or equal to the ge prefix length. Not used if "prefix to filter" is set to "any". |
Default
NA
Command Mode
Privileged User
Example
This example configures prefix-based filtering mechanism
(config-data)# ip prefix-list iplist permit any