linerate

This command selects the line rate of each wire-pair in an SHDSL group.

Syntax

interface shdsl 0/0
group <group-id>
linerate auto
linerate kbps <min-rate> <max-rate>

Command	Description
auto	Automatically negotiates the Line rate. Up to 5696 Kbps per wire-pair.
<min-rate>	Defines the minimum line rate in kilobits per second. The lowest supported rate is 432 Kbps.
<max-rate>	Defines the maximum line rate in kilobits per second. The highest supported rate is 5696 Kbps.

Default

The default is setting is auto.

Command Mode

Privileged User

Example

This example selects automatic line rate:

(conf-shdsl-0)# linerate auto