neighbor interface
This command defines the Layer 3 interface.
Syntax
neighbor {<neighbor tag>|a.b.c.d|X:X::X:X} interface <if name> <interface ID>
|
Command |
Description |
|---|---|
|
a.b.c.d|X:X::X:X |
Defines the IP address of the neighbor (IPv4 or IPv6). |
|
neighbor tag |
Defines the neighbor tag. |
|
Interface Type (ifname) |
Interface ID |
|
|---|---|---|
|
gigabitethernet |
GigabitEthernet interface slot and port (VLAN ID is optional) |
[SLOT/PORT.VLANID] |
|
cellular |
Cellular interface ID |
0/0 |
|
gre |
Tunnel GRE ID |
[1-255] |
|
ipip |
Tunnel IPIP ID |
[1-255] |
|
l2tp |
L2TP ID |
[0-99] |
|
pppoe |
PPPoE interface ID |
[1-3] |
|
pptp |
PPTP ID |
[0-99] |
|
vlan |
Vlan ID |
[1-3999] |
|
loopback |
Loopback ID |
[1-5] |
|
bvi |
Bridge interface |
[1-255] |
Default
NA
Command Mode
Privileged User
Example
The following is an example of how to use this command.
(config-data)# router bgp 1 (conf-router)# neighbor 10.12.5.10 interface gre 100