passive-interface
This command suppresses routing updates on an interface.
Syntax
passive-interface ifname no passive-interface ifname
|
Interface Type (ifname) |
Interface ID |
|
|---|---|---|
|
gigabitethernet |
GigabitEthernet interface slot and port (VLAN ID is optional) |
[Slot/Port.VLAN ID] |
|
cellular |
Cellular interface ID |
0/0 |
|
gre |
Tunnel GRE ID |
[1-255] |
|
ipip |
Tunnel IPIP ID |
[1-255] |
|
l2tp |
L2TP ID |
[0-99] |
|
pppoe |
PPPoE interface ID |
[1-3] |
|
pptp |
PPTP ID |
[0-99] |
|
vlan |
Vlan ID |
[1-3999] |
|
loopback |
Loopback ID |
[1-5] |
|
bvi |
Bridge interface |
[1-255] |
Default
NA
Command Mode
Privileged User
Example
This example sets the specified interface to passive mode.
# configure data (config-data)# router rip (conf-router)# passive-interface vlan 1