priority
This command provides support for scenarios where the device is used as a bridging device (Layer 2) and IEEE 802.1p priority marking for the bridged traffic is required. When this is used, outgoing packets belonging to a specified VLAN interface are marked with the configured priority value.
Syntax
priority <priority level>
|
Command |
Description |
|---|---|
|
priority level |
Defines the priority level which can be any value from 0 (lowest) through 7 (highest). |
Default
NA
Command Mode
Privileged User
Example
This example sets the priority level to "7".
(config-data)# interface vlan 1 (conf-if-VLAN 1)# priority 7