Modify Redundant Interface

This section describes how to modify a redundant interface.

➢

To modify redundant interface and change redundancy settings:

1.

From the Ethernet Redundancy, choose option 3, and then press Enter.

2.

Choose the Master Redundant Interface to modify, and then press Enter.

3.

Enter the number corresponding to the interface in the selected network that you wish to make modify (for example, 'eno', 'eno1', 'eno2'), and then press Enter..

4.

Type y to confirm the changes, and then press Enter; the OVOC server automatically reboots for the changes to take effect.