ipmedia
This command configures various IP-media parameters.
Syntax
(config-voip)# media ipmedia (media-ipmedia)#
Command |
Description |
---|---|
agc-disable-fast-adaptation |
Disables the AGC (Automatic Gain Control) Fast Adaptation mode. |
agc-enable |
Activates the AGC (Automatic Gain Control). |
agc-gain-slope |
Defines the AGC convergence rate. |
agc-max-gain |
Defines the maximum signal gain of the AGC [dB]. |
agc-min-gain |
Defines the minimum signal gain of the AGC [dB]. |
agc-redirection |
Redirects the AGC output towards the TDM instead of towards the network. |
agc-target-energy |
Defines the target signal energy level of the AGC [-dBm] |
answer-detector-activativity-delay |
Defines the time (in 100-msec resolution) between when the device activates the Answer Detector and when it actually starts to detect. |
answer-detector-enable {off|on} |
Enables the device's Answer Detector feature. |
answer-detector-low-energy-sensitivity {0|1} |
Enables low-energy sensitivity for the Answer Detector. |
answer-detector-redirection {0|1} |
Enables the Answer Detector to apply to the IP network side (1) instead of the PSTN side (0). |
answer-detector-sensitivity |
Defines the Answer Detector sensitivity. |
answer-detector-silence-time |
Defines the duration of silence (in 100-msec resolution) from when no speech input is detected by the Answer Detector until the device sends an End Of Speech event |
energy-detector-enable |
Activates the Energy Detector. |
energy-detector-redirection |
Redirect the Energy Detector towards the network instead of TDM. |
energy-detector-sensitivity |
Defines the Energy Detector's sensitivity. |
energy-detector-threshold |
Defines the ED's (Energy Detector's) threshold according to the formula: -44 + (EDThreshold * 6) [- dBm]. |
ipm-detectors-enable |
Enables DSP IP Media Detectors. |
Command Mode
Privileged User
Example
This example enables AD:
(config-voip)# media ipmedia (media-ipmedia)# answer-detector-enable on (media-ipmedia)# activate