Connecting to Remote Management (iDRAC)

The device allows remote management using Dell’s iDRAC controller. The iDRAC is used for remote virtual console, monitoring the server components, and updating the server firmwares.

The complete guide for the iDRAC interface can be found here.

By default, the server is provided with the following iDRAC parameters:

■

The iDRAC network port is configured to DHCP.

■

iDRAC credentials:

●

Username: root

●

Password: The password is shown on the Information tag, located on the bottom-right of the front panel (Item #5 in Front Panel). You need to pull the tag out. The password is written on the downside of the tag.

➢

To connect to the iDRAC web management:

1.

Make sure that the iDRAC network port is connected to the LAN.

2.

When connected, the DHCP IP address is displayed on the LCD screen.

3.

Use a web browser to access the iDRAC web management site using this iDRAC IP address.

4.

Use the iDRAC credentials to log in to the web management interface.