Notice
Information contained in this document is believed to be accurate and reliable at the time of printing. However, due to ongoing product improvements and revisions, AudioCodes cannot guarantee accuracy of printed material after the Date Published nor can it accept responsibility for errors or omissions.
This document is subject to change without notice.
Date Published: December-30-2024
WEEE EU Directive
Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with unsorted waste. Please contact your local recycling authority for disposal of this product.
Security Vulnerabilities
All security vulnerabilities should be reported to vulnerability@audiocodes.com.
Customer Support
Customer technical support and services are provided by AudioCodes or by an authorized AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes products and for contact information, please visit our website at https://www.audiocodes.com/services-support/maintenance-and-support.
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments (suggestions or errors) regarding this document, please fill out the Documentation Feedback form on our website at https://online.audiocodes.com/documentation-feedback.
Stay in the Loop with AudioCodes
Notes and Warnings
A safety, environmental and regulatory booklet ("Safety, Environmental, and Regulatory Information") is included in the device packaging. Before installing the device, make sure to carefully review the safety instructions in the booklet provided with the device.
The device is an INDOOR unit and thus, must be installed ONLY indoors. In addition, Ethernet port interface cabling must be routed only indoors and must not exit the building.
For full environmental specifications, please refer to Dell's documentation.
This device must be installed only in a restricted access location.
Service of the device must be made only by qualified service personnel.
AC powered units must be connected only to a grounded AC mains power socket.
Circuit Overloading: Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.
Caution Laser: This device contains a Class 1 LED/Laser emitting device, as defined by 21CFR 1040 and IEC825. Do not stare directly into the beam or into fiber optic terminations as this can damage your eyesight.
Caution Electrical Shock: Do not attempt to open or disassemble this device. The device carries high voltage. Contact with internal components may cause electrical shock and bodily harm.
For all service and maintenance issues, contact AudioCodes technical support (see Customer Support above).
Reliable Earthing: Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g., use of power strips.)
Related Documentation
|
Document Name |
|---|
|
SBC-Gateway Release Notes for Latest Release (LR) Versions 7.4 |
Document Revision Record
|
LTRT |
Description |
|---|---|
|
41701 |
Initial document release. |