Customizing Browser Tab to Display Device's IP Address

You can customize the tab of the web browser that you use to access the device's Web interface to display the device's IP address.

You can customize the tab to display the device's IP address only if a logo image is used in the Web interface (see Replacing the Corporate Logo with an Image).

➢ To display device's IP address on browser tab:
1. Create an ini file that includes the following parameter settings: 
UseWebLogo = 1
WebLogoText =

If you have never configured the [WebLogoText] parameter, you can omit it from the ini file. If you have configured it, then set it to an empty value, as shown above.

2. Upload the ini file as an incremental ini file, using the Auxiliary Files page (see Loading Auxiliary Files).
3. Restart the device with a save-to-flash for your settings to take effect.