Configuring Voice Gain (Volume) Control
The device allows you to configure the level of the received (input gain) Tel-to-IP or IP-to-IP signal and the level of the transmitted (output gain) IP-to-Tel or IP-to-IP signal. The gain can be set between -32 and 31 decibels (dB).
|
➢
|
To configure gain control through the Web interface: |
|
1.
|
Open the Voice Settings page (Setup menu > Signaling & Media tab > Media folder > Voice Settings). |
|
2.
|
Configure the following parameters: |
|
●
|
'Voice Volume' (VoiceVolume): Defines the voice gain control (in decibels) of the transmitted signal. |
|
●
|
'Input Gain' (InputGain): Defines the PCM input gain control (in decibels) of the received signal. |