settings
This command configures the Redirect Number IP-to-Tel table, which lets you define manipulation rules for manipulating the redirect number received in SIP messages for IP-to-Tel calls.
Syntax
(config-voip)# gateway manipulation settings (gw-manip-settings)#
Command |
Description |
---|---|
add-cic |
If add carrier identification code as prefix. |
add-ph-cntxt-as-pref |
Adds the phone context to src/dest phone number as prefix. |
add-prefix-for-isdn-hlc-fax |
If set and incoming ISDN SETUP contains High Layer Compatability IE with Facsimile, prefix FAX will be added to received Calling number. |
alt-map-tel-to-ip |
Enables different number manipulation rules for redundant calls. |
ip2tel-redir-reason |
Set the IP-to-TEL Redirect Reason. |
map-ip-to-pstn-refer-to |
if set to 1, manipulate destination number from REFER-TO in TDM blind transfer. |
prefix-2-ext-line |
FXS: If enabled (1) and Prefix2ExtLine is detected, it is added to the dial number as prefix |
prfm-ip-to-tel-dst-map |
Perform Additional IP2TEL Destination Manipulation |
prfm-ip-to-tel-src-map |
Perform Additional IP2TEL Source Manipulation |
swap-tel-to-ip-phone-num |
Swaps calling and called numbers received from Tel side. |
tel-to-ip-dflt-redir-rsn |
Tel-to-IP Default Redirect Reason. |
tel2ip-dst-nb-map-dial-index |
Tel to IP Destination Number Mapping Dial Plan Index. |
tel2ip-redir-reason |
Tel-to-IP Redirect Reason. |
tel2ip-src-nb-map-dial-index |
Tel to IP Source Number Mapping Dial Plan Index. |
tel2ip-src-nb-map-dial-mode |
Tel to IP Source Number Mapping Dial Plan Mode. |
use-refer-by-for-calling-num |
If set to 1, use a number from Referred-By URI, as a calling number in outgoing Q.931 SETUP. |
Command Mode
Privileged User