settings

This command configures gateway routing parameter.

Syntax

(config-voip)# gateway routing settings
(gw-routing-settings)# 

Command

Description

alt-routing-tel2ip

Enables Alternative Routing Tel to IP.

alt-rte-tel2ip-keep-alive

Time interval between OPTIONS Keep-Alive messages for IP connectivity (seconds).

alt-rte-tel2ip-method

Tel to IP Alternative Routing Connectivity Method.

alt-rte-tel2ip-mode

Methods used for Alternative Routing operation.

alt-rte-tone-duration

Alternative Routing Tone Duration (milliseconds).

empty-dst-w-bch-nb

Replace empty destination number (received from Tel side) with port number.

gw-routing-server

Enables Gateway Routing Server.

ip-dial-plan-name

Assigns a Dial Plan (by name) for tag-based IP-to-Tel routing rules.

ip-to-tel-tagging-dst

IP-to-Tel Tagging Destination Dial Plan Index.

ip-to-tel-tagging-src

IP-to-Tel Tagging Source Dial Plan Index.

ip2tel-rmv-rte-tbl

Remove prefix defined in IP to Trunk Group table (IP-to-Tel calls).

ip2tel-rte-mode

Defines order between routing incoming calls from IP side and performing manipulations.

mx-all-dly-4-alt-rte

The maximum delay that will not prevent normal routing (msec).

mx-pkt-loss-4-alt-rte

The maximum percentage of packet loss that will not prevent normal routing.

npi-n-ton-to-cld-nb

Add NPI and TON as prefix to called number.

npi-n-ton-to-cng-nb

Add NPI and TON as prefix to calling number.

probability-on-qos-problem

If QoS problem, a call has this probability (in percentage) to continue in order to reevaluate the QoS.

redir-nb-si-to-tel

Override screening indicator value of the redirect number in Setup messages to PSTN interface..

src-ip-addr-input

Source IP address input.

src-manipulation

Describes the hdrs containing source nb after manipulation.

tel-dial-plan-name

Assigns a Dial Plan (by name) for tag-based IP-to-Tel routing rules.

tel2ip-rte-mode

Defines order between routing incoming calls from Tel side and performing manipulations.

tgrp-routing-prec

TGRP Routing Precedence.

trk-id-as-prefix

Add Trunk/Port as nb prefix.

trkgrpid-prefix

Add Trunk Group ID as prefix.

Command Mode

Privileged User