authentication ms-chap2 (PPP/MLP over T1)

This command enables Microsoft Challenge Handshake Authentication Protocol Version 2 (MS-CHAP2) to be used by this PPP/MLP serial interface.

Syntax

authentication ms-chap2

Command	Description
‘no’ at prefix of command	Disables MS-CHAP2 on this PPP/MLP serial interface.

Default

By default, MS-CHAP2 is enabled.

Command Mode

Privileged User

Example

This example describes MS-CHAP2:

(conf-if-serial-ppp 0/0)# authentication ms-chap2