clock-source
This command specifies the clock source on the current T1 interface.
Syntax
clock-source <source>
|
Command |
Description |
|---|---|
|
<source> |
Defines the source of the clock: ‘internal’ – clock is taken locally from WIC itself ‘line’ – clock is taken from the line i.e., from the remote side |
Default
By default, the clock source is ‘line’.
Command Mode
Privileged User
Example
This example sets clock source to the internally generated on T1 Port 0/1:
(conf-if-t1 0/1)# clock-source internal