line-buildout-loss
This command specifies the buildout loss on the current T1 interface.
Syntax
line-buildout-loss <loss>
|
Command |
Description |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
<loss> |
Defines the line buildout loss [dB]:
|
Default
By default, the line buildout loss is 0 dB.
Command Mode
Privileged User
Example
This example sets the line buildout loss to -7.5 dB on t1 port 0/0:
(conf-if-t1 0/0)# line-buildout-loss -7.5