Configuring Device through CLI Wizard
Once you have accessed the CLI Wizard, the wizard prompts you along to configure the device's management settings in the following order:
|
1.
|
Web/CLI users' login passwords |
|
3.
|
SNMP community strings |
As you complete a configuration topic (listed above), the wizard prompts you for the next topic. You can skip a specific configuration topic and accept default settings by typing the no command when prompted. Within each configuration topic, you can accept the default value of a parameter and skip to the next parameter, by simply pressing the Enter key.
|
●
|
For each parameter, the CLI wizard displays the current setting enclosed in square brackets [...]. |
|
●
|
If you do not make any changes to parameter values in the CLI Wizard, at the end of the last configuration stage (i.e., SNMP settings), the CLI Wizard quits and returns you to the initial CLI prompt. |